* Add trending links
* Add overriding specific links trendability
* Add link type to preview cards and only trend articles
Change trends review notifications from being sent every 5 minutes to being sent every 2 hours
Change threshold from 5 unique accounts to 15 unique accounts
* Fix tests
* Add account statuses cleanup policy model
* Record last inspected toot to delete to speed up successive calls to statuses_to_delete
* Add service to cleanup a given account's statuses within a budget
* Add worker to go through account policies and delete old toots
* Fix last inspected status id logic
All existing statuses older or equal to last inspected status id must be
kept by the current policy. This is an invariant that must be kept so that
resuming deletion from the last inspected status remains sound.
* Add tests
* Refactor scheduler and add tests
* Add user interface
* Add support for discriminating based on boosts/favs
* Add UI support for min_reblogs and min_favs, rework UI
* Address first round of review comments
* Replace Snowflake#id_at_start with with_random parameter
* Add tests
* Add tests for StatusesCleanupController
* Rework settings page
* Adjust load-avoiding mechanisms
* Please CodeClimate
* Add account_notes relationship
* Add tests
* Fix owned account notes not being deleted when an account is deleted
* Add post-migration to clean up orphaned account notes
* Fix account deletion sometimes failing because of optimistic locks
In some rare occasions[1], deleting accounts would fail with a
`StaleObjectError` exception.
Indeed, account deletion manually sets the `AccountStat` values without
handling cases where the optimistic locking on `AccountStat` would fail.
To my knowledge, with the rewrite of account counters in #15913, the
`DeleteAccountService` is now the only place that changes the counters in
a way that is not atomic.
Since in this specific case, we do not care about the previous values of the
account counters, it appears we don't need locking at all for this table
anymore.
[1]: https://discourse.joinmastodon.org/t/account-cant-be-deleted/3602
* Bump MAX_SUPPORTED_VERSION in maintenance script
If a status with a hashtag becomes very popular, it stands to
reason that the hashtag should have a chance at trending
Fix no stats being recorded for hashtags that are not allowed
to trend, and stop ignoring bots
Remove references to hashtags in profile directory from the code
and the admin UI
Express follow_recommendations in terms of account_summaries rather than
accounts, integrate filters that are unconditionally used, and materialize
the resulting view.
This should result in the bulk of the computation being performed only once
instead of **once per recommendation language**.
Prevent new accounts from being created using the same underlying
e-mail as a suspended account using extensions and period
permutations. Stores e-mails as a SHA256 hash
* Add indication to admin UI of whether a report has been forwarded
* Rework how forwarded status is displayed
Co-authored-by: Claire <claire.github-309c@sitedethib.com>
* Add bell button
Fix#4890
* Remove duplicate type from post-deployment migration
* Fix legacy class type mappings
* Improve query performance with better index
* Fix validation
* Remove redundant index from notifications
* Add database support for list show-reply preferences
* Add backend support to read and update list-specific show_replies settings
* Add basic UI to set list replies setting
* Add specs for list replies policy
* Switch "cycling" reply policy link to a set of radio inputs
* Capitalize replies_policy strings
* Change radio button design to be consistent with that of the directory explorer
* feat: add possibility of adding WebAuthn security keys to use as 2FA
This adds a basic UI for enabling WebAuthn 2FA. We did a little refactor
to the Settings page for editing the 2FA methods – now it will list the
methods that are available to the user (TOTP and WebAuthn) and from
there they'll be able to add or remove any of them.
Also, it's worth mentioning that for enabling WebAuthn it's required to
have TOTP enabled, so the first time that you go to the 2FA Settings
page, you'll be asked to set it up.
This work was inspired by the one donde by Github in their platform, and
despite it could be approached in different ways, we decided to go with
this one given that we feel that this gives a great UX.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add request for WebAuthn as second factor at login if enabled
This commits adds the feature for using WebAuthn as a second factor for
login when enabled.
If users have WebAuthn enabled, now a page requesting for the use of a
WebAuthn credential for log in will appear, although a link redirecting
to the old page for logging in using a two-factor code will also be
present.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add possibility of deleting WebAuthn Credentials
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: disable WebAuthn when an Admin disables 2FA for a user
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: remove ability to disable TOTP leaving only WebAuthn as 2FA
Following examples form other platforms like Github, we decided to make
Webauthn 2FA secondary to 2FA with TOTP, so that we removed the
possibility of removing TOTP authentication only, leaving users with
just WEbAuthn as 2FA. Instead, users will have to click on 'Disable 2FA'
in order to remove second factor auth.
The reason for WebAuthn being secondary to TOPT is that in that way,
users will still be able to log in using their code from their phone's
application if they don't have their security keys with them – or maybe
even lost them.
* We had to change a little the flow for setting up TOTP, given that now
it's possible to setting up again if you already had TOTP, in order to
let users modify their authenticator app – given that now it's not
possible for them to disable TOTP and set it up again with another
authenticator app.
So, basically, now instead of storing the new `otp_secret` in the
user, we store it in the session until the process of set up is
finished.
This was because, as it was before, when users clicked on 'Edit' in
the new two-factor methods lists page, but then went back without
finishing the flow, their `otp_secret` had been changed therefore
invalidating their previous authenticator app, making them unable to
log in again using TOTP.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* refactor: fix eslint errors
The PR build was failing given that linting returning some errors.
This commit attempts to fix them.
* refactor: normalize i18n translations
The build was failing given that i18n translations files were not
normalized.
This commits fixes that.
* refactor: avoid having the webauthn gem locked to a specific version
* refactor: use symbols for routes without '/'
* refactor: avoid sending webauthn disabled email when 2FA is disabled
When an admins disable 2FA for users, we were sending two mails
to them, one notifying that 2FA was disabled and the other to notify
that WebAuthn was disabled.
As the second one is redundant since the first email includes it, we can
remove it and send just one email to users.
* refactor: avoid creating new env variable for webauthn_origin config
* refactor: improve flash error messages for webauthn pages
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* Add UserNote model
* Add UI for user notes
* Put comment in relationships entity
* Add API to create user notes
* Copy user notes to new account when receiving a Move activity
* Address some of the review remarks
* Replace modal by inline edition
* Please CodeClimate
* Button design changes
* Change design again
* Cancel note edition when pressing Escape
* Fixes
* Tweak design again
* Move “Add note” item, and allow users to add notes to themselves
* Rename UserNote into AccountNote, rename “comment” Relationship attribute to “note”
- Change audio files to not be stripped of metadata
- Automatically extract cover art from audio if it exists
- Add `thumbnail` parameter to `POST /api/v1/media`, `POST /api/v2/media` and `PUT /api/v1/media/:id`
- Add `icon` to represent it in attachments in ActivityPub
- Fix `preview_url` containing URL of missing missing image when there is no thumbnail instead of null
- Fix duration of audio not being displayed on public pages until the file is loaded
This should not be an issue in practice because of the Rails-level uniqueness
check, but local accounts having a NULL domain means the uniqueness constraint
did not apply to them (since no two NULL values are considered equal).
There are no obvious ways it could be misused, as the secret is not
really used for anything, but it is best to secure it for the future
Follow-up to #13613
* Fix PostgreSQL load when linking in announcements
Fixes#13245 by caching status lookups
Since statuses are supposed to be known already and we only
need their URLs and a few other things, caching them should
be fine.
Since it's only used by announcements so far, there won't
be much statuses to cache.
* Perform status lookup when saving announcements, not when rendering them
* Change EntityCache#status to fetch URLs instead of looking into the database
* Move announcement link lookup to publishing worker
* Address issues pointed out during review
* Change ActivityPub follower/following collections to not link first page
* Add support for hiding followers and following of remote users
* Switch to using a single `hide_collections` column
* Address code style remarks
* Add announcements
Fix#11006
* Add reactions to announcements
* Add admin UI for announcements
* Add unit tests
* Fix issues
- Add `with_dismissed` param to announcements API
- Fix end date not being formatted when time range is given
- Fix announcement delete causing reactions to send streaming updates
- Fix announcements container growing too wide and mascot too small
- Fix `all_day` being settable when no time range is given
- Change text "Update" to "Announcement"
* Fix scheduler unpublishing announcements before they are due
* Fix filter params not being passed to announcements filter
