Nix-Configs/nixos.nix
2023-03-26 00:08:12 -04:00

217 lines
6 KiB
Nix
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# sudo nix-channel --add https://github.com/NixOS/nixos-hardware/archive/master.tar.gz nixos-hardware
# sudo nix-channel --add https://github.com/nix-community/home-manager/archive/master.tar.gz home-manager
let systemInformation = import ./system/system-information.nix; in
{ config, pkgs, lib, ... }@nixpkgs:
{
networking.hostName = systemInformation.hostname;
imports =
[
./configs/filesystems.nix
./system/hardware-requirements.nix
./modules/machine-info.nix
<home-manager/nixos>
];
# Bootloader
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
boot.loader.efi.efiSysMountPoint = "/boot/efi";
boot.kernelParams = [
# Power efficiency
# https://wiki.archlinux.org/title/Power_management#Kernel_parameters
"nmi_watchdog=0"
];
boot.kernel.sysctl = {
# Set IO batching to 2 minutes for power reasons
"vm.dirty_writeback_centisecs" = 12000;
};
boot.initrd.supportedFilesystems = [ "btrfs" ];
# Setup keyfile
boot.initrd.secrets = {
"/crypto_keyfile.bin" = null;
};
# Enable networking
networking.networkmanager.enable = true;
powerManagement.cpuFreqGovernor = "powersave";
# Set your time zone.
time.timeZone = "America/New_York";
# Select internationalisation properties.
i18n.defaultLocale = "en_US.UTF-8";
i18n.extraLocaleSettings = {
LC_ADDRESS = "en_US.UTF-8";
LC_IDENTIFICATION = "en_US.UTF-8";
LC_MEASUREMENT = "en_US.UTF-8";
LC_MONETARY = "en_US.UTF-8";
LC_NAME = "en_US.UTF-8";
LC_NUMERIC = "en_US.UTF-8";
LC_PAPER = "en_US.UTF-8";
LC_TELEPHONE = "en_US.UTF-8";
LC_TIME = "en_US.UTF-8";
};
# Enable the X11 windowing system.
services.xserver.enable = true;
services.logind.lidSwitch = "ignore";
# Enable the GNOME Desktop Environment.
services.xserver.displayManager.gdm.enable = true;
services.xserver.desktopManager.gnome.enable = true;
# Configure keymap in X11
services.xserver = {
layout = "us";
xkbVariant = "3l";
};
# Enable CUPS to print documents.
services.printing.enable = true;
# Enable sound with pipewire.
sound.enable = true;
hardware.pulseaudio.enable = false;
security.rtkit.enable = true;
services.pipewire = {
enable = true;
alsa.enable = true;
alsa.support32Bit = true;
pulse.enable = true;
# If you want to use JACK applications, uncomment this
#jack.enable = true;
# use the example session manager (no others are packaged yet so this is enabled by default,
# no need to redefine it in your config for now)
#media-session.enable = true;
};
# Define a user account. Don't forget to set a password with passwd.
users.users.ember = {
uid = 1312;
isNormalUser = true;
description = "Ember";
extraGroups = [ "networkmanager" "wheel" ];
shell = pkgs.fish;
openssh.authorizedKeys.keys = import ./configs/programs/ssh/authorizedKeys.nix;
};
home-manager.users.ember = import ./configs/home.full.nix;
# Allow unfree packages
nixpkgs.config.allowUnfree = true;
nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
# List packages installed in system profile. To search, run:
environment.systemPackages = with pkgs; [
wget
gnumake
htop
wl-clipboard
unzip
appimage-run
vlc
file
pavucontrol
gst_all_1.gstreamer gst_all_1.gst-plugins-base gst_all_1.gst-libav gst_all_1.gst-vaapi gst_all_1.gst-plugins-bad gst_all_1.gst-plugins-good gst_all_1.gst-plugins-ugly
];
environment.gnome.excludePackages = with pkgs.gnome; [
pkgs.gnome-console
pkgs.gnome-text-editor
gnome-software
gnome-music
gedit
geary
totem
];
fonts.fonts = with pkgs; with import packages/all-packages.nix nixpkgs; [
justseeds
manrope
];
# List services that you want to enable:
services = {
gnome.tracker.enable = false;
gnome.tracker-miners.enable = false;
flatpak = {
enable = true;
};
fwupd.enable = true;
syncthing = {
enable = true;
dataDir = "/home/ember";
configDir = "/home/ember/.config/syncthing";
user = "ember";
devices = {
redwood.name = "🍂 Redwood";
redwood.id =
"WY2GFMX-CQ52VBK-M3Y4JJH-4FIA6F2-NGB3S2I-SJ42D45-7FT77KH-2OGO2AZ";
mugwort.name = "🌿 Mugwort";
mugwort.id =
"GVJZF4E-5BYFG7U-P6KZPLL-CSM3O3H-JOJUZIX-YGZ3QXM-CHWTA4J-AG6KFQK";
kudzu.name = "🥦 Kudzu";
kudzu.id =
"RQUVE3L-D345NMM-4KUE7D6-PCJ3HIO-VFZNYJ6-BNF2YH3-6UBCXF7-NS5YKQR";
};
overrideDevices = true;
};
openssh = {
# Disable by default
banner = "Welcome to ${systemInformation.prettyHostname}!\n";
passwordAuthentication = false;
};
};
environment.machineInfo.prettyHostname = systemInformation.prettyHostname;
# Enable the OpenSSH daemon.
# services.openssh.enable = true;
# Open ports in the firewall.
# networking.firewall.allowedTCPPorts = [ ... ];
# networking.firewall.allowedUDPPorts = [ ... ];
# Or disable the firewall altogether.
networking.firewall.enable = false;
networking.hosts = {
"162.255.119.254" = ["www.librepunk.club"];
"129.21.49.69" = ["www.librepunk.club"];
};
# This value determines the NixOS release from which the default
# settings for stateful data, like file locations and database versions
# on your system were taken. Its perfectly fine and recommended to leave
# this value at the release version of the first install of this system.
# Before changing this value read the documentation for this option
# (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
system.stateVersion = "22.11"; # Did you read the comment?
# Set up hardware acceleration
# https://nixos.wiki/wiki/Accelerated_Video_Playback
hardware.opengl = {
enable = true;
extraPackages = with pkgs; [
intel-compute-runtime
intel-media-driver # LIBVA_DRIVER_NAME=iHD
vaapiIntel # LIBVA_DRIVER_NAME=i965 (older but works better for Firefox/Chromium)
vaapiVdpau
libvdpau-va-gl
];
};
hardware.enableAllFirmware = true;
hardware.cpu.intel.updateMicrocode = systemInformation.isIntel;
hardware.cpu.amd.updateMicrocode = systemInformation.isAmd;
# high-resolution display
hardware.video.hidpi.enable = systemInformation.isHiDPI;
nix.settings.auto-optimise-store = true;
}